Chimney repair in Mundelein, Illinois

The Lake County winter is hard on brick. Water gets into the mortar, freezes, and opens it a little more each time. Most chimney repairs are about keeping that water out, and the rest are about the flue inside.

  • Crown, cap and flashing
  • Tuckpointing and masonry sealing
  • Liners and flue tile
A gloved hand holding a pointing trowel with mortar on a chimney crown, snowy rooftops behind, an illustrative AI image
Illustrative AI image, not a job of ours.

Can’t talk right now? Leave your number.

Where chimneys fail, and what we repair

Brick and mortar are porous. When water soaks in and freezes, it expands, and the mortar joints and the flue tiles crack. A cracked crown or a missing cap lets in more of it, and in a place with Midwestern winters that cycle repeats until something gives.

We repair the parts that let it happen: tuckpointing on worn mortar joints, masonry sealing on the brick, crown repair and sealing with an elastomeric membrane and reinforced concrete, and the chimney cap and flashing at the roof.

Inside the chimney the work is on the flue and the smoke chamber. That includes cracked flue tile, stainless steel liner installation, smoke chamber parging, the damper and the brick of the firebox.

  • Tuckpointing and masonry sealing
  • Crown repair and sealing
  • Chimney cap and flashing
  • Cracked flue tile and stainless steel liners
  • Smoke chamber parging
  • Damper, firebox and refractory brick repair
A brick chimney with a concrete crown and a metal cap, with trees behind

What you get with Chimney repair

  • Aimed at the water

    A crown, a cap and flashing in good shape do most of the work of keeping water out of the brick, which saves the mortar below.

  • Mortar joints made tight again

    Tuckpointing replaces worn mortar so the joints can shed water again, and the brick stops taking on the weather.

  • The flue gets attention too

    A cracked flue tile or a damaged liner is a safety matter, and a stainless steel liner is a common answer. We will say if yours needs one.

  • Only what is needed

    We look first, say what is wrong, and leave out repairs the chimney does not need.

Not sure what it needs?

Tell us what is going on and we’ll call you back

Four short questions, then a person calls you back. No obligation.

What is going on with the chimney?
What kind of fireplace or chimney?
How soon do you need us?
Where can we reach you?

Signs of trouble

These are common reasons people call about repairs.

  • Crumbling or missing mortar between the bricks
  • White staining or flaking brick
  • Cracks in the crown, or a cap that is loose or gone
  • Water stains on the ceiling near the chimney
  • Pieces of flue tile in the firebox
  • A damper that sticks, or smoke that does not go up

How a repair job goes

An inspection usually comes before the repair, so that the work is based on what is actually damaged.

  1. We look at the damage and tell you what we see

  2. We explain the repair and what it is meant to do

  3. We do the work on the roof, in the flue or at the hearth

  4. We check the result and tidy up

When you do not need a repair

A hairline crack in a crown is often just sealed and left. Old brick that has darkened with soot is not necessarily failing. Not every chimney that looks old needs mortar, and we would rather tell you that the chimney is sound than start work it has no need of.

Chimney repair questions

What is tuckpointing?

It is the replacement of worn mortar between bricks, so the joints are tight and the wall can shed water again. It is a common repair on older chimneys.

Why is the crown important?

The crown is the concrete slab at the top that sheds water away from the flue and the brick. When it cracks, water gets in and the freeze-thaw cycle does the rest.

When is a stainless steel liner used?

It is a usual answer when a clay liner is cracked or when an appliance changes, for example a new stove or insert. An inspection will show whether yours needs one.

Do I need an inspection before a repair?

We would like one, so the work follows what is really damaged. If you already know where the problem is, tell us and we will look at that spot first.

Do you repair stoves and factory-built fireplaces?

We work on masonry hearths, factory-built fireplaces, wood stoves, pellet stoves and inserts, as well as furnace and boiler flues. Describe yours when you call.

Want a chimney problem looked at?

Tell us what the chimney is doing and leave your number. We call you back to set a time.

Prefer the phone?(847) 380-9496

Optional, but it helps us prepare.

Call nowVisit